In this example we used to create a light bulb 3DsMAX.The point is rotated with the spline shape, and the performance of the glass material.
Maker: 3DsMAX7.0 Chinese version, other versions similar methods and procedures.
Production process:
1, into the "Create", "Graphics" command panel, select the "line" button, draw a curve as the outer contour of the bulb, shown in Figure 01.
Draw a curve as the outer contour of the bulb
2, into the edit command panel, in the "Select" rollout, click "Spline" button to enter the "spline" second object hierarchy, the "geometry" rollout "contour" parameter is set to 10, click the "contour" button, the single closed curve becomes double, shown in Figure 02.
The single closed curve becomes double
3, select ''Edit List "drop-down list in the" turning "modifier, click the" maximum "button to set the position of the rotary shaft, the rotary member shown in Figure 03 obtained.
Provided the position of the rotary shaft
4, into the "Create", "Graphics" panel, click "Line" button, draw a curve as a bulb metal outer contour of the rear seat, the same as a closed curve into single lane, shown in Figure 04.
Draw a curve as a bulb outer contour of the metal backseat
5, select the edit command panel "Edit list" drop-down list in the "turning" modifier, click the "maximum" button to set the position of the rotary shaft, the rotary member shown in Figure 05 is obtained.
Provided the position of the rotary shaft
6, the interior of the bulb member produced.
Select bulbs metal back seat in the view, right-click in the menu bar, click the pop-up command "hidden objects is not selected," will hide the rest.Go to the "Create", "Graphics" panel, click "Line" button, draw a curve as the lamp wick contour lines in FIG. 06.
Draw a curve as a bulb contour wick
7, into the edit command panel, select the "turning" modifiers'' Edit List "drop-down list, click the" Max "button to set the rotating shaft of the rotating body shown in Figure 07 is obtained.
Provided the position of the rotary shaft
8, the production of tungsten and tungsten-support portion.Enter "Create", "Graphics" panel, click the "Line" button, draw a curve as tungsten support.Into the edit command panel, in "Rendering" rollout select "may render" and "display rendering grid" option, and "thickness" value is set to 2.0, 08 shown in FIG..
Modify command panel
9, select "Tools", "array" command, the operation for the array, the Z axis is the rotation angle is 60 degrees, the "quantity" is set to 6, click "OK" button, so that an array of a total of six support tungsten , 09 shown in FIG..
Array out of a total of six tungsten Design Forum
12/2 Next