Birthday, we generally like to order a birthday cake, dinner time, a candle, in the "Happy Birthday" song to the birthday person with best wishes.Here we make a three-dimensional birthday cake with 3DsMAX.
Maker: 3DsMAX7.0 Chinese version.Other steps are similar version.
Production process:
First, create a cake model
1, into the create command panel, select the "Graphics" panel, and then use a "star" tool to create a star-shaped in top view, is provided a radius of 1 to 45, radius 35 2, point 6, a radius of 7.5, of radius 2 0.FIG 01 shows results obtained star.
Star effect
2, the use of "extrusion" means a three-dimensional object obtained extruded, parameter settings shown in Figure 02.
FIG parameters
03 to obtain the shape shown in FIG..
modeling
modeling
3, the effect of the rotation of oil production, the use of "twist" tool rotation, set angle is 180, the offset 40, an effect shown in Figure 04.
Set the angle to 180
4, make a cone effect.In the "Edit List" drop-down list box "taper" of the tool, the "number" value is set to -1, an effect shown in Figure 05.
Taper
5, into the create command panel, create a sphere using the "sphere" tools.Then enter modify command panel, in the drop-down list box, select "Edit Grid" tool, enter the "apex" sub-object level, use the move tool to move the vertices to make small cherry shape, as shown in Figure 06.
small cherry
6, into the create command panel, using the "cylinder" tool to create a cylinder in top view, and then use the "Edit grid" tool edit its vertex, shown in Figure 07 to give Bing Cherries.
Edit Mesh
7. Use the "smooth" tool to refine the complexity set to 1, then "bend" bending tool, set the angle to 30, 08 to obtain results shown in FIG..
bending
8, making a cake body.Into the "Graphics" panel edge 72 to create a star-shaped curve is provided a radius of 1 to 500, a radius 490 2, point 72, and a radius of 2 to 5, and then use the "extruded" extrusion molding tool, to obtain results shown in Figure 09 shown in FIG..
Asteroid curve 72 side
9, after extrusion molding on the surface is flat, do the following pattern, "Edit grid" tool, into the sub-surface object hierarchy, after the upper surface is selected using the "Noise" tool parameter settings shown in Figure 10.
Noise
11 to obtain results as shown.
effect
10. Use the "smooth" meticulous tool to set the parameters as shown in FIG 12.
Mesh Smooth
Effect 13 shown in FIG..
effect
11, the selected style cakes, hold the Shift key, drag the mouse to copy the cake layer, and reduce, the shape and position shown in Figure 14.
Copy the layer cake
12, into the "Graphics" panel, use the "Line" tool to create a curve, as the curve profile of the plate shown in Figure 15.
Creating a curve
Modify command panel enters into the "spline" second object hierarchy, the "contour" parameter is set to 3, press Enter to confirm, then the curve becomes a closed lane, as shown in FIG. 16.
It becomes a two-lane closure
13, in the ''Edit List "drop-down list box" turning "tool rotation operation, to obtain the effect of the cake tray 17 shown in FIG..
Cake pan 29 Tutorial Forum
12/2 Next