Your location:Tech News>Tips>CAD>Use AutoAutoCAD automatic object capture tool case Detailed Tutorial

Latest News

Use AutoAutoCAD automatic object capture tool case Detailed Tutorial

Author:fsadmin

Views:

  I want to start analyzing the following details:

  A, AutoAutoCAD2013 object snap menu

  Press and hold the AutoAutoCAD2013 drawing window [Shift] key or Ctrl key and click the right mouse button pop-up object snap shortcut menu to enable object snap function.

  AutoAutoCAD自动对象捕捉工具的使用详解  三联

  Second, click below the sketch set in AutoAutoCAD2013 "Object Snap" dialog "Options" button, open the "auto-capture settings box".

  

  Figure 02

  

  Figure 03

  [Auto Capture Settings]

  Control automatically capture tags, tooltips, and magnet display.

  If the cursor or objects on the target block to be press key Tab key points of the object captured through all available.

  【mark】

  Automatic control of the captured display tag.The labeling is the geometric symbols when the cross point of the display cursor to capture.

  [Magnet]

  Turn on or off automatically capture magnet.Magnetic means and lock the cross cursor automatically moves to the nearest point of capture.

  [Note] display automatically capture tool

  Control automatically capture tooltips.A tooltip is a label used to capture the portion of the object description.

  [Display] automatically capture the target frame

  Open or close the automatic capture of the target display box.

  Appear in the target block is a block inside the object when capturing the crosshairs.

  【colour】

  Display "Graphic Window Color" Dialog.

  [Size] tag automatically capture

  Display size setting automatic capture labeled.

  [Object Snap Options]

  Set running object snaps mode.

  [Ignore hatch objects]

  The specified object capture options.

  [Use] Z value replace the current elevation

  Capturing object is ignored specified object captured position value Z, and Z values used to set the level of the current UCS.

  [Ignore negative dynamic UCS Z Object Snap]

  Specify capture objects UCS ignored during dynamic geometry having a negative Z value.

  [AutoTrack Settings]

  Control and the AutoTrack (auto tracking) mode associated setting that the polar tracking or object snap available (see DSETTINGS) is opened when Tracking.

  [Display polar tracking vector]

  When polar tracking open is displayed in a specified angle vector.Use polar tracking, a straight line can be drawn along the angle.The number of polar angle is approximately 90 degrees, such as 45, 30 and 15 degrees.(TRACKPATH system variable = 2)

  In AutoAutoCAD2013 3D view, also shown polar tracking vector is parallel to the Z axis of the UCS, and tool tip displays an angle of + Z or -Z direction along the Z axis based on.

  [] To display full-screen trace vector

  Tracking is the vector line to assist a user in a specified relation with other objects of the drawing object by a specific angle or.If this option is selected, the alignment vector is displayed as infinitely long line.(TRACKPATH system variable = 1)

  [Display] Automatic Tracking Tool Tips

  Control automatically capture tags, tooltips, and magnet display.

  [Acquisition] alignment point

  【automatic】

  When the target frame to capture the object on the display automatically tracking vector.

  [Get] with the Shift key

  When moved to press the Shift key and the target object is captured on the frame, the trace display vector.

  [Target] box size

  Pixels is provided a target object snap display frame size.

  If "auto-capture target display box" (or APBOX set to 1), when the target object is captured frame displayed in the center of the crosshairs.Prior to determining the size of the target frame target frame is locked to the magnetic capture site, should the cursor reaches a position near the capture points.In the range from 1 to 50 pixels.

  [Design] tooltip appearance

  Drawing tooltip control the color, size and transparency.

  [Setup]

  Display "tool tip Appearance" dialog.

  [Light] of contour

  Show "appearance of the outline of light" box.

  [Camera profile settings]

  29 Tutorial Forum

Recommend article

Relate article