There are many techniques in select Edit AutoCAD, we collect aggregate here, I hope for your help .
Select Edit in AutoCAD, it is sometimes accidentally chose more than one entity, this time at the command does not end does not need to cancel the command again, simply enter remove a carriage return after the prompt "Select destination", and then one by one to choose which elements of multiple-choice (of course, not too much at the prompt, or refractory ah!) You can get.
When AutoCAD select Edit, enter just two letters such as mn, then you will find a long list of command command-line prompt appears, including the fence, wc, wf, etc., it is convenient .
AutoCAD user may select with a mouse to a target, the target is selected one by one to the selection set, in addition, also provides AutoCAD Window (to type "w" in response to Select object: or directly on the screen from right to left pull a rectangle response Select object: prompt), Crossing (to type "C" in response to Select object: or a rectangle from left to right pull directly on the screen in response to Select object: prompt), Cpolygon (to type "CP" response select object :), Wpolygon (to type "WP" select object :) response to a variety of ways to select the target window .
Crossing Window and wherein for rectangular window, and the Wpolygon Cpolygon the polygon window, and in the Window Wpolygon embodiment, only when all parts of entities are contained in the window, was only selected entities, and in the embodiment Crossing and Cpolygon , as long as part of the entity included in the window, the entity to be selected .
Fence AutoCAD also provides a method (to type "F" Select object :) response to selection entity, not draw a closed polyline, and all the entities choose the polyline intersects i.e. .
When selecting a target, you may accidentally select the target should not be selected, then the user can type R to respond to "select objects:" prompt, and then put some mistakenly select the target removed from the selection set, and then type A, again choose focus Add target .When the selected entity and other entities may be close together when the CTRL key while clicking the left mouse button and then a continuous, close together at this time are sequentially highlighted entity, until the selected entity is highlighted, then press the enter key (or right-click), choose the entity .
AutoCAD conditionally selection entity, i.e. a ''filter in response to select objects: .In the 2000 version also provides QuickSelect mode selection entity, and filter function is similar, but more simple, convenient .Constructor function selection set of AutoCAD provides a strong, flexible charting proper use can greatly improve efficiency .
31. When you select the graphics you want to cut trim command prompt, it does not support the common window and crossing selection method.When you want to cut a number of segments, to select several times to complete.Then you can use the command prompt to select fence cut off of the pattern, "f", and a dotted line is drawn on the screen, enter, then the dotted line is a contact pattern to be cut off all.
32. Click "Object Propertys" toolbar "Make objects" layer current "button, then select any graphic on going in the layer mapping area, immediately transform the current layer to the layer where the selected graphic.
33. When you open a file with R11 and R12 R14, even though the correct choice of the Chinese character font files, or will appear garbled characters because the code page R14 and R11 or R12 uses different.Or to the site can download AutoDesk''s home page code page conversion tool wnewcp.After running wnewcp, first select the "R11 / R12" check box, and then click "Browse" button, select the file or directory you want to convert, and then select the new code page, ANSI936 or GB2312 can click "Start Conversion" That is the beginning of conversion.After conversion, the characters can be correctly displayed in R14.
34. Trace size and arrows in AutoCAD drawing the trajectory line sometimes becomes hollow, with TRIMMODE command, enter a new value in the prompt can be changed back to a solid.
35. AutoCAD opens with an old map, sometimes encounter unexpected error interrupt exit, then the first to use the method described in 28, if the problem persists, you can create a graphics file, inserting the old block diagram form, can Solve the problem.
36. Custom buttons with a clever tool.There are many lsp file in AutoCAD can provide very useful command for us, as chtext.lsp is a good word to modify the command, especially for a large number of modifications of the text, but lsp file must be loaded first before using this command.Generally you can choose "Tools" menu "Load Application ."Option, then use dialog box opens Chtext under AutoCAD R14 / Support.lsp file, and then click the "Load" button, or you can type directly in the command line "(load" chtext ")" for the purpose of loading, and so do some tedious total.Here we use a custom tool button way to solve this problem, right-click any toolbar button, pop-up "Toolbars" dialog box, click "Customize."Button in the" Categories: "select" Custom "item, will appear empty button drag the toolbar target location, click" Close "button to return, then right-click an empty button, the" Button Properties "dialog" name: "field command button is named," Help: "field you can write or not write, and then in the" Macro: "type in" (load "chtext") cht ", as for" button Icon ", the system provides user-selectable icons, you can also point "Edit."Drawing on their own or directly invoke an existing bmp file, the last point" Apply "button and close the dialog box in order to return.So you made your job a button.Due to an increase in the back "cht" (note: there must be a space in front), so you just press the button tool they can go directly to the target file you want to edit.
37. Inserting AutoCAD Drawing into Word Document
Word document production, often requires a variety of illustrations, Word graphics limited, especially complex graphics, the more obvious shortcomings, AutoCAD is a professional graphics software, powerful, very suitable for more complex graphics rendering, drawing good graphics with AutoCAD, then insert a Word document production complex is a good way to solve the problem, eXPORT function can be used to provide the first AutocAD AutoCAD graphics output such as BMP or WMF format, and then into a Word document can be copied to the clipboard first AutoCAD drawing, and then in Word document and paste.It should be noted that, due to AutoCAD default background color is black, while the Word background color is white, should first AutoCAD graphics background color to white.In addition, the AutoCAD graphics into Word documents, often empty side is too large, the effect is to ignore
miss you.The Trim function on the Word toolbar picture trimmed the margin is too large problem can be solved.
38. Change the width
AutoCAD provides a polyline width PEDIT modify the command, to modify the line width polyline (if polyline, the command will first into polyline, and then change the line width), but the operation PEDIT fan, only select an operation of the entity, inefficient.AutoCAD R14 comes with Bonus program provides mpedit command for batch modify polyline width, very convenient and efficient.In AutoCAD2000, the entity may specify a width (LineWeight) to modify the line width attribute, simply select the line width to change entity (entity set), to change the line width attribute, change the line width is more convenient, it should be noted that the , LineWeight properties width displayed on the screen or not depends on the system variable WDISPLAY, the variable is oN, the display on the screen width LineWeight properties, this variable is OFF, the display is not.Polyline width with LineWeight entity can control the line width, the difference between the two is, LineWeight line width is an absolute width, while the width is relatively polyline width, that is to say, no matter what the size of the graphic to print, LineWeight linewidth are unchanged, but the polyline width proportional change the print size with the size change, no impact on the scale LineWeight command line width, regardless of how many times the entity is scaled, LineWeight line widths are the same, and more than polyline width is changed with the change in scale.
39. Graphic printing techniques
Since there is no printer installed or want to enter the high-end printer with others AutoCAD drawing, you need to go to another computer to print AutoCAD drawings, but other computers may not install AutoCAD, or due to various reasons (such as AutoCAD drawing font on the other computer not normal, printing over the network, network printing is not normal, etc.), can not use another computer for normal printing, this time, you can print on your own computer AutoCAD drawing to a file, printer file form, and then again in another computer on a DOS copy command to the printer output file to the printer, method: copy <打印机文件> prn / b, it should be noted that, in order to use this feature, you must first add the other computers on a particular printer model in the system, and make it the default printer, in addition, do not forget to COPY after the last increase / b, indicate in binary form the output file to the printer printer.
40. Selection Techniques
The user can select a target using a mouse, to select a target one by one to the selection set, addition, AutoCAD also provides a Window (to type "w" in response to Select object: or directly on the screen from right to a rectangular frame Zola response Select object: prompt), Crossing (to type "C" in response to Select object: or a rectangle from left to right pull directly on the screen in response to Select object: prompt), Cpolygon (to type "CP" response
Select object :), Wpolygon (to type "WP" Select object :) response to a variety of ways to select the target window, and wherein Window Crossing a rectangular window, and the Wpolygon Cpolygon the polygon window, and in the Window Wpolygon manner, only when all parts of entities are contained in the window, was only selected entity, and in Cpolygon Crossing and, as long as part of the entity included in the window, it was selected as the entity.
Fence AutoCAD also provides a method (to type "F" Select object :) response to selection entity, not draw a closed polyline, and all the entities choose the polyline intersects i.e..When selecting a target, you may accidentally select the target should not be selected, then the user can type R to respond to "select objects:" prompt, and then put some mistakenly select the target removed from the selection set, and then type A, again choose focus Add target.When the selected entity and other entities may be close together when the CTRL key while clicking the left mouse button and then a continuous, close together at this time are sequentially highlighted entity, until the selected entity is highlighted, then press the enter key (or right-click), choose the entity.Selection entity may also be conditional, i.e. with the "filter in response to select objects :, AutoCAD2000, there is also provided a mode selection entity QuickSelect, filter function, and the like, but more simple, convenient.Constructor function selection set of AutoCAD provides a strong, flexible charting proper use can greatly improve efficiency.
29 Tutorials Forums