1, we open the AI, create a new document: 900 * 600 pixels, the color mode is RGB, raster effects for the screen, click OK, so just fine.
2, we use the text tool to write documents on their favorite characters or symbols, fonts recommended that text with the stroke of thick, color: # ed0072.
3, this step is very complicated, to be repeated several times, please be patient.Select the text, and select: Object> Expand, check the "object" and "fill", then click OK.
4, select: Object> Path> Offset Path, a first layer of contour drawing.
5, curves a group, set the color: # ff0051.
6, a first layer selected profile, select: Object> Path> Offset Path.Contour drawing of the first layer, 5 is displaced, the other settings unchanged.When you click OK curve group, set the color: # fe2514.
7. Repeat this step once for displacement 10,15,20,25,30, we will see the following results.
8, a first color from the first layer to the lowermost layer below.
Then we open the PS, is also a new 900 * 600 pixels, the color mode is RGB, with a resolution of 72 pixels / inch document, a copy from the road to the PS AI Paste, Paste options "Smart Objects".
9, in order to facilitate the distinction between smart objects we put these layers from top to bottom once named.
10, on the "outline 1" new blank layer, named "text layer facade", and "text layer" load selection, in the "text layer facade" fill color (same color and text color), select the selection tool, then hold down the Alt key while pressing the arrow keys down key once, and then cancel the selection, fill the layer style.
11, using the same method to be facade each layer, the relationship perspective the idea, to have a thickness variation.Because it elevational effect, each layer corresponding to the position also moves about, below.
12, the new blank layer on the background layer and name it "background", pull a gradual change from the top down, color: # 7e8892, # 484f57.Then add noise to filter.
13, the last with ribbons and decorated complete the final results.