This is where you will create:
Step 01
255px files, create 255.First, open the grid ( "View"> "" grid "), and the Snap to Grid (View> Snap to Grid).Next, you need a grid every 5px.Go to Edit> Preferences> Guides> Grid, enter the segment of each square in the grid lines and 1.You can also open a live preview "information" panel ( "window"> "information) to the size and shape of the position.Do not forget to replace the unit of measurement from the Edit> Preferences> Units> total pixels.Al these options will significantly increase your work efficiency.
Step 02
Let''s start with the rectangle tool (M).[Create a 190 220px Caller shape, with any color fill and remove stroke.The selected shape and to affect the fresh> Style of> Fillet.Enter a 110px radius, click OK, then go to Effect> Via> fisheye.In more than 20% of bending slider, click "OK", then go to Object> Expand Appearance.
Step 03
Continue to use the ellipse tool (L), to create a 70 180px shape and to influence> by> fisheye.30% bending slider, click OK, and then go to Object> Expand Appearance.
Step 04
Select two shapes has created and added to the rear (Control + Control + B) copy.Close the visibility of these fresh copy, you''ll need them.Select the rest of the visible shape, and then click Find "from" negative reception path button "on the panel".resdulting shape of the filling R = 224, G = 20 B = 72.
Step 05
To select the shape and effects created in the previous step> 3D> Extrude & Bevel.Input data shown below, click OK, then go to Object> Expand Appearance.
Step 06
Let''s focus on the "Layers" panel.You should find a simple group.Click on the small arrow icon until you find the clipping path (within the meaning of the arrows in the image below), delete them all.Now, the first shape shown in FIG selected, clicking "Pathfinder join button panel, and fill the resulting path R = 131, G = 5 = 42.remainging shape of the filling R = 224, G = 20 B = 72.Finally, you should have four shapes in the Layers panel, two visible and invisible two.
Step 07
Selecting a large, visible shape and appearance panels.Open the pop-up menu, and click "Add New Fill.This will add a second fill your shape.Select it, and using a linear gradient, as shown in FIG..Opacity indicates the percentage of zero gradient from yellow image.This means that you need to select the gradient slider and lower its opacity to 0%.Next, add a simple shape stroke, and its appearance from the selection panel.It 5pt wide, inner alignment, provided its color at R = 255 G = 255 B = 255, and reduces its opacity to 5%.Finally, the entire path and reselect Effect of TOT> Style> Inner emission.Into the data shown below, and click "OK".
Step 08
Select the rectangle tool (M), create two squares (50 50 pixels), and place them in the first image displayed.The shape and filled with black and white top bottom shape.Grab the Direct Selection Tool (A) and focus on the black shape.Select two, anchors the bottom, to Object> Path> Average.Check and click "OK".This becomes a square triangle, the second image shown in FIG..Move to the bottom of the square.Similarly, direct selection tool (A) above the selected anchor, Object> Path> Average.Check and click "OK".
Step 09
Select two triangles in the previous step, and to influence> Fuzzy> Gaussian blur.7px input radius, click OK, then the shape of the two groups.Select a small, "O" type, and a copy of the front (Control + Control + F).This copy to the front (press Shift + Control +]), and fill it with white.To "transparency" panel ( "window"> "Transparency") together with the Group selection.Open the pop-up menu, and then click "Set opacity mask.Your final illustration should look like in the fourth image.
Step 10
Rotation of the large, oval (a fourth step) back visible.With no padding and added 0.75pt, black stroke.Align outside, and then go to Object> Expand Appearance.In the linear gradient shown in the second image fill shapes.
Step 11
Reselect a large "O" shape, and a copy in front (slave control + + F.), Then grab the ellipse tool (L), create shapes 125px 190, and the second image display as it.Select the new shape alonw and click with fresh copies from the Pathfinder "panel intersect" button.Linear gradient shown in the fourth image filled shapes and its opacity to 80%.
Step 12
Turn small, oval (a fourth step) back visible.With no padding and add 1PT, black stroke.Align outside, and then go to Object> Expand Appearance.Linear gradient shown in the second image of fill shapes, reducing its transparency is 50%, and put in front of it (the SHIFT + Control +]).
Step 13
Disable Snap to Grid "(View> Snap to Grid).Choose a large "O" type, and two copies in front (the SHIFT + Control +]).Select the top copy and hit the down arrow once.Reselect both copies and click on the minus from Pathfinder "the front panel buttons.You will have a set of two thin GRET.Remove the bottom shape (indicated by the arrow of the third image), and then select the remaining shape.Go look, delete stroke, leaving only a filling effect.White and reducing its opacity to 50%.
Step 14
Reselect a large "O" shape, and two new copies in front (press Shift + Control +]).Select the top copy and hit the up arrow.Reselect both copies and click on the minus from Pathfinder "the front panel buttons.Also, you will set a thin two GRET.Remove the top of the shape (arrow), and then select the remaining shape.Delete stroke, effect, leaving only a complement.Its color is disposed g of R = 120 = 5 B = 24.
Step 15
Select the Ellipse tool, click on your drawing board. Enter the height of the frame 10 and the width of the box 2.5 and then click OK.This will create a made 102.5 PX shape.Fill with R = 237 G = 166 B = 168, and below it as shown in FIG..This copy, and filled with white, where it is then rotated, as shown in FIG..
Step 16
Focus on the shape in the previous step made.Select the pink shape on the step and go to Effect> Blur> Gaussian Blur.Input 2.5px radius, click "OK", then select the white shape and go to Effect> Blur> Gaussian Blur.Enter 3px radius, and then click OK.
Step 17
Finally, re-enable the Snap to Grid (View> Snap to Grid), and then select the "Ellipse tool (L).Create 25px shape 90, is filled with R = 71, G = 5 B = 42, then sends it to the back (press Shift + Control +) and de Effect> Blur> Gaussian Blur.Enter 5px radius, click "OK" and you''re done.
Final results
www.29jc.com
Recommended Reading