This tutorial by AI illustration production techniques, design a breath of spring, beautiful illustrator tutorials, tutorials are translated from foreign tutorials, middle gave detailed instructions in Chinese, the students believe that it is good to get started operation, a patient is made illustrations plus technology the process of creation is a illustration from a simple pattern to a finished work, we will complete the manager of the entire creation, specifically, how to make such a picture, the students together to learn about it.
1.How to create Starling
850 pixel width and 850 pixel height to create a new document (File> New).
We start from scratch.Delete stroke color and set the fill color that you see in the picture below.Next, elliptical Tool (L) and to create a dark gray oval.
Now, we will apply the effect to the Inflate oval.Go Effect> twisted> expansion.Enter the options you see below.Expand this shape (Object> Expand Appearance).
First, create a small light gray oval (elliptical use tool (L)) and slightly rotated to the left.After that, add a black circle and a smaller white circle to highlight the eyes.To get a perfect circle, hold down the Shift button while using the ellipse tool.
To create a subject, use the Ellipse Tool (L) draw a dark gray oval.To be modified by the effect> distort> arc.In the figure below, you can see the option to enter the.Deployed shape (Object> Expand Appearance).
The body attached to the head.
For the beak, create a yellow ellipse.Holding in a state selected, to effect> distort> arc, and enter the following options.Expand shape.
In keeping selected while expanding shape, create a new copy (Control-C, Control-F) in front of.Do not deselect it and then click Delete Anchor Point tool (-) and to remove them by clicking on the three anchor mark.Now you should have two parts of the bill: the top is light yellow, dark yellow bottom.
The lighter the top of the stretch a little to the right.Beak ready!
Give it to Starling.
On the wing.Starling filling using the same color as the body and head create an elliptical.Holding in a state selected, to effect> distort> arc, and enter the following options.Expand shape.
Next, we will give some shadow wings.Create a copy (Control-C, Control-B) and along a diagonal direction to the bottom right.Make a new copy of a little deeper.
To keep the same fill color and draw a small oval, because we want to add a few feathers to the wings.Direct Selection Tool (A), selecting the top and bottom anchor, using the same tools and move them down a little.This is another way distorted ellipse.
Next, make a few copies of this shape, and place them under the actual shape of the wing.Entire wing is now complete.Packet.
The wing in situ.
In this step, we will create the tail.Starting from an ellipse, and then into effect> distort> arc, and input options you see below.Next, we will apply the same ellipse another effect: Effect> Warp> expansion.Since the print screen option on my computer allows me to display only one option window, so you can see the Arc option below.Now, because the options you need to Inflate effect, scroll down to see them.
When we want the tail is more interesting, create a narrow horizontal oval.Direct Selection Tool (A), selecting the top and bottom anchor and move them down a little.The remanufacturing several copies of a narrow ellipse, and place it presses shown in FIG..This is the complete tail, so grouping.
The inflatable Options window:
Tail on the Starling.
Now we will create one leg.Draws an ellipse.Click the direct selection tool (A), selecting the top and bottom of the anchor, and move them in the direction of the arrow shown in FIG..Notice how the handle anchor change their position.
Together with a copy, so now you have two birds toes.
Add a third copy of the toes, pointing in opposite directions.
Finally, add a narrow rectangular connector to the toe, this will be the leg.
Legs placed behind the bird''s body.Adding the same color with the body filled with a small oval.The ellipse must be placed where the leg begins.
Create another copy of the leg, so close to the first one, and do not forget the little oval.
Remember how we create a "feather" on the bird''s wings and tail?Create another copy of this twisted ellipse, and make sure it has the same body starlings fill color (using the eyedropper tool (I) obtain the same body fill color).Since we will be using a lot of this shape, it is best to copy an extra on the side reserved for future use.I will put this form, called feather.So the three feathers on the bird''s head, so that he becomes more blurred.
Then, a new copy of this plume should be a lighter color (same color filled tail feathers), and placed in the head of some copies and wings starling.
Finally, production of black feathers new copy (on the same feather color feathers), and some of its copies on Starling''s stomach.
2.How to create Apple Blossom
Start creating petals with a white oval, and then go to Effect> deformation> fish-eye, and then enter the options you see below.You just to help you better see it below to see a black stroke, so you do not need it in the final result.
Pick up the feathers, make sure it is narrow and pink, then put them on petals.
Select the entire petals, and group (right-click> Group).
Do not remove the petal of choice, but clicking a rotary tool (R).Then, hold down the Alt key, click on the desired location on the petals of a rotating shaft.A new dialog window will pop up.Input rotary angle of 72 degrees, and then press the copy.To repeat the last operation, please press three times Control-D, then you will notice that you now have a five flower.
You still need to spend the middle part, so placing a yellow circle in the middle.To make this more natural yellow middle section, let''s twist it.While maintaining selected, the process proceeds effect> distort and transform> Rough.In the new dialog window, enter the size and details of the option value is not too high - just move the slider and find that you like the results can be.Do not forget the "Options" section select the "absolute" in the "point" section, select the "smooth".Once you like how it looks, press OK.
In order to spend more natural, remove the fill color and set the fill color.Arc tool used, several curves drawn in the middle part of the flower.We are creating stamen.Then making another copy of the intermediate portion of the flower, the content of it in front of all (Control-X, Control-F), which change the fill color, and make a smaller copy of the.They are placed as shown in FIG..Now we look like flowers blooming apple tree!
Create a copy of flower first flower, and change its color to obtain two different flowers.Remember, in the final results, not white petals with black stroke.
Let us draw a semi-open new flowers.To do this, we need the special shape of the petals.Starting pink oval, and then deformed (Effect> Warp> arc), and input options you see below.Do not cancel the selection and application of new effects: Effects> Deformation> fisheye.The second effect of options can be found below.
Fish Eye Options window:
We remember today the creation of the first flower, white flower?Copy a petal from the flower, and the fill color to pink.Shrink slightly this new petal.This creates another copy of the petals (Control-C, Control-B), so that this copy darker and wider.
Next, you need to take the first open flower petals half we created earlier.Placing two of them are shown below.
Creating the first two copies of petals, the petals and place them all back, as shown in FIG..
As we draw the first flowers of white stamens, like, draw this half Blooming.
Let''s sit down and draw the petals of all places.Add a slight green oval, direct selection tool (A) to select the top anchor point and move it downwardly.
Feathers, long and narrow, and use it as the stem.
Now we have to create the bud.Remove the first petal from our previous production of semi-open flowers.Behind the addition of two pink petals.Then, add all the stuff behind a dark-colored petals.Please note that for budding petals will not shrink.
Just as we finished flowering bud half done for.
Use the following show the fill color to create another bud.
So here are all the flowers and buds we''ve ever created.For your convenience, each flower separate groups.
3.How to create a Leaf
Start creating green oval leaves from.Distorting effects of its application: Effects> Distort> fisheye.And then expand shape.
Still selected, click on reflection tool (O), then press Enter.In the new dialog box, check the horizontal axis, an angle of 0 degrees, and then press the copy.You will get a copy of the previous shape.Use arrow key to move down this copy.In the picture below, you can see how the two shapes should overlap, but do not actually need black stroke.
Now we want a more natural leaf.Unified for both the shape of the leaves created: while maintaining selected, press the button on the Unite Pathfinder panel ( "window"> "Pathfinder").
Now you have a shape, let''s twist it: go to Effect> Distort & Transform> rough.Depending on your leaf size, about the size of 2 pixels input options, absolutely check the details of about 20 inches, smooth check-point, and finally press OK.
Take feathers, so that it becomes dark green, and as veins application.
In this step, I''m sure you already know how warped leaf.Just make sure you group the whole leaf (right-click> Group).
There are three different leaves to choose from.You should keep a constant, two twisted.
For your convenience, separate packets of each leaf.
4.How to create a branch
Rounded Rectangle tool and draw take a long rectangular brown.
Now double-click the Transform tool (Shift-R key), then enter the options that you can see in the second image below.According to the first arrow in FIG stretching to obtain a rounded rectangular branch.
Here it is displayed in a dialogue window of the Warp Tool Options.
First, the leaves on the branches, and then add the half-open buds and flowers.
Finally, add the rest of the flower.
The starling on branch.
5.How to create a background
Grab the Rectangle Tool (M) and click on your drawing board.In the new dialog window, input 850 pixel width and height, and then press OK.Will change its fill color to a soft blue.
Take the ellipse tool (L), while holding down the Shift key to create a circle in the middle.
The square and circle you put starlings and branches.
Creating several oval clouds.Black strokes, you do not really need to tell you how elliptical should overlap.Note that branch cloud and how large circles overlap, but there is no starlings.
Putting everything where you want it back, select the middle of a large circle and create a new copy (Control-C, Control-F) in front of.Then close the copy (Control-X) and place all contents (Control-F) in front of.The copies are marked with black strokes before all content.
You can also add a black stroke color to the circle, so you can see better internal.
Now be careful - select everything except the light blue square (our background).You should select the top copy of the starlings, tree branches, clouds, middle of the big blue circle, as well as black strokes.After entering Object> Clipping Mask> Make (Control-7).
You should get similar results with the following image.
A simple graphic to a complete work, the students of the middle time, effort and patience, AI is not difficult to learn, or to strengthen the students can practice.
AI illustrator production skills, design a breath of spring, beautiful illustrator tutorial
Full tutorial finished.This tutorial is helpful if you can recommend to a friend by your side.Learned, can also contribute to us, share your learning experience with you: http: // bbs.29jc.com