The installation system prompts Units specified dont exist SHSUCDX cant install for how to solve[Win11 Solutions]
28 2021-08-18 07:40
Some time ago, the company equipped a dozen Lenovo computers. I installed the system, but found recover files from unreadable hard drive that it was not very smooth. Normally, the system does not need to change the hard disk mode. You only recover files from unreadable usb drive need to change the boot mode. It always prompts Units specified don't. exist SHSUCDX can't install. recover files from usb after format Later, Baidu found out some methods, most of which were not easy to use. I spent an hour or two in recover files from usb drive free the background. I also used Google and Youdao finally found the cause of the problem. Now share it, recover files from usb drive freeware I am afraid that I will waste time in the future, and at the same time provide convenience for my recover files from usb drive linux friends, which can be roughly divided into the following solutions:
First of all, your hard disk recover files from usb drive mac partition is wrong, right?First use PQ to format ntfs or far32, enter PE and format C drive to FAT32.Change recover files from usb drive online the hard disk mode ACHI in the BIOS to IDE~ You can install it if you go to the BIOS to change recover files from usb drive raw the hard disk mode to compatibility mode
Insert the GHOST xp CD, set it to the CD-ROM drive to recover files from usb drive reddit start, when the interface appears, select xp pe (Old Maotao), press Enter.The notebook starts.Then use recover files from usb flash drive the GHOST installation on the desktop, there will be no problems, it is only installed in the c drive, recover files from usb hard drive and will not affect other drives.good luck!
The laptop computer installs GHOST and the system recover files from usb key mac prompts Units specified don't exist SHSUCDX can't install .
My friend bought a Lenovo laptop and recover files from usb mac free wants to reinstall XP. When installing GHOST, the system prompts Units specified don't exist SHSUCDX recover files from usb on mac can't install .
This error message is caused by the format error of the hard disk. Generally, there recover files from usb pen drive are three ways to solve it:
1.Change the hard disk mode ACHI in the BIOS to IDE~
To go to the recover files from usb stick free BIOS to change the hard disk mode to compatibility mode, it can be installed, but I can't find this recover files from usb stick freeware item when I enter the BIOS, so I have to use the second method:
2.After selecting the GHOST disk to recover files from usb stick linux enter the PE, run PQMAGIC.Convert the disk format to ntfs or far32, I choose NTFS, then GHOST recover files from usb stick mac successfully.
In fact, there is a third method:
3.Directly use the installation version of the system recover files from usb thumb drive disk to install step by step.Of course this is more troublesome!
Note: Some on the Internet say recover files from usb using cmd to run PQMAGIC.Convert the disk format to ex, that is how to install the Linux system.
============ recover files from usb windows 10 =====================
unist specified don't exist. shsucdx can't install translates to mean: the recover files from windows 7 usb specific partition (unit) does not exist, shsucdx can't install SHSUCDX(.COM) is the CD-ROM extension recover files from wiped hard drive program under dos, the program to install SATA CD-ROM.
Possible reasons for this problem:
1. The recover files hard drive macquarie park hard disk partition is not activated (you can use Fdisk or diskgen to view it, and diskgen to view recover files in buffalo external drive the activated partition is marked in red)
2. The hard disk has bad sectors. 3. The hard disk can' recover files moved from hard drive t be recognized normally (for example, some SATA hard disks can't be recognized by the Dos system recover files moved to external drive without a SATA driver).Diagnosis and resolution process: 1. First use the diskgen tool to check whether recover files off bad hard drive the system partition is activated (reactivate the partition that will be installed on the system), recover files off corrupted hard drive and the file system format of the partition (such as ntfs or fat32).Then the problem is still not recover files off dead hard drive solved, and then proceed as follows.2. Restart and enter Bios (press F2), restore factory settings recover files off external hard drive (load manufacture defaults), set CD boot (Boot —> cd/dvd drives), and set the hard disk mode to recover files off faulty hard drive compatibility mode (Advanced —> IDE Configuration —> SATA . Mode (probably so) —> Compatible).
3. Then recover files off formatted hard drive save, restart, and start to use the Ghost system disk for system installation.problem solved.
PS: recover files off hard drive crashed If you don't want to be so troublesome, use a pure system disk for installation, or change to a higher recover files off hard drive free version (with SATA optical drive) Ghost system disk for installation.In addition, you can use the recover files off laptop hard drive PE system of the Ghost system to install (enter the PE system, you can see the "GHOST installation" recover files off mac hard drive system on the desktop).Update: If the hard disk has bad sectors, you can detect the location of the recover files on a hard drive bad sectors, and then create a separate partition for the bad sectors to hide the bad sectors!