USB3 controlled by ASM1153E0External external hard drive box firmware which is better[Win11 Solutions]
12 2021-08-18 07:30
The mobile hard disk box controlled by ASM1153E is SATA to USB3.0 miles is a better solution. Many how to recover data from an unreadable hard drive brands of mobile hard disk boxes use this master control, but if you want to pursue better box how to recover data from bad external hard drive performance, you can flash the firmware, but the ASM1153E master controller has more firmware , Which one how to recover data from bad hard drive mac is better?Let's test it after brushing in separately.
As a reference, the following test the speed how to recover data from bad laptop hard drive of the mobile hard disk under the box controlled by the Infick JMS578, you can see that the writing how to recover data from bad sector hard drive is 404M/S, and the reading is 412M/S.
Next, start to test the flashing of different firmware, how to recover data from bad usb flash drive the speed test results of the mobile hard disk, the firmware is basically the ASM1153E firmware upgrade how to recover data from bitlocker encrypted hard drive tool comes with it, and there is a firmware that is this.
1. Test the speed result under the how to recover data from broken external hard disk firmware of , write 352M/S, read 379M/S.
2. Under test the firmware of a, read 415M/S and write how to recover data from broken external hard drive 356M/S.
3. Test a, read 414, write 355M/S
4. Test a, which is similar to the above
Test a firmware, how to recover data from broken hard disk drive speed is 419M/S, write 357M/S.
Test firmware, read 378M/S, write 352M/S.
Test a1ab21 firmware, how to recover data from broken hard drive mac read 416M/S, write 356M/S.
Summary: _21_00_00.bin and _21_00_00.The two firmware bins are relatively how to recover data from broken harddrive at home close, with almost the same performance, the lowest among all running points, and they do not how to recover data from broken internal hard drive support TRIM.
The performance of the other firmwares is almost the same, and the running scores are how to recover data from broken laptop hard drive all around 400. Among all the firmwares, there is only one that supports TRIM, _A1_82_40.bin, so if how to recover data from broken state hard drive this box is used to install ssd, it is strongly recommended to flash this firmware.Moreover, I have how to recover data from broken usb flash drive a good wing m.2 The small box of SATA to USB is also this version of the firmware.
_A8_08_18_TRIM. how to recover data from broken wd hard drive After flashing the firmware of bin, the firmware version is displayed in the software as _A1_82_40. how to recover data from buffalo external hard drive The performance and functions are the same as _A1_82_40, and TRIM is also supported.
If the mobile how to recover data from clicking ide hard drive hard disk box in your hand is also this firmware, you can refer to the firmware with better performance how to recover data from clicking laptop hard drive in the flash test.