Phicomm k2p moonlight silver a2 version 22785 Brush the old Maozi firmware tutorial[Win11 Solutions]

20 2021-08-17 21:10



  If you think the original firmware of Phicomm k2p Moonlight Silver is not easy to use, you can flash how to recover files from windows 10 hard drive the third-party firmware, and the best is the old ASUS firmware. How to flash the K2P newly purchased how to recover files from windows reformatted hard drive in 18 years, the following is K2P 22.7.8.Version 5 firmware is an example to teach you, the how to recover files in usb infected by virus software and firmware that you need to use will be given to you below.

  1. First connect the router wan how to recover files of a external hard drive port to the operator's network, connect the computer to the router lan port with a network cable, how to recover files of a usb flash drive and set the computer network card to automatically obtain the IP. The router is powered on, and the how to recover files off a broken hard drive browser visits 192 after it is connected.168.2.1. Follow the normal initialization steps to configure how to recover files off a dead hard drive a router to access the Internet and verify that the router is good.For convenience later, first how to recover files off a failed hard drive manually configure the computer network card IP address to 192.168.2.2, 255.255.255.0, gateway 192.168 how to recover files off a formatted hard drive .2.1 .

  2. Simply experience the official firmware page before flashing, and say goodbye to the old how to recover files off of a bad usb firmware.Next, check the built-in firmware upgrade page (the method is to press and hold reset when how to recover files on a corrupted hard drive the router is powered off, power on, and let go after a few seconds), it looks like this:

  3. Because how to recover files on a corrupted usb drive I want to switch to the breed web, this firmware update is simply not necessary, because I am how to recover files on a external hard drive afraid of flashing bricks, I also want to back up the programmer firmware and eeprom, and I don't try how to recover files on a mac hard drive to upgrade the firmware here.Directly use the Telnet tool of phitools in the altar to enter the next how to recover files on a usb flash drive step:

  4. After opening the Telnet function of k2p, verify that it is really opened (cmd putty how to recover files on external before reformatting it secureCRT will work):

  5. No problem, the next step is to use "Router Brush Breed+Web Console Assistant how to recover files on external hard drive mac v4.The 8 version "small white brush machine, basically the default settings are OK, and the degree how to recover files on formatted external hard drive of automation is very high.I was thinking about the lazy person to the end, but after the breed was how to recover files on hard drive after format successfully brushed in, an error occurred when the official firmware was changed in the second how to recover files on hard drive that won' stage:

  6. This breed Web lazy tool assistant built-in version v1.3 I can't open it anyhow (my win7 64 how to recover files on my external seagate drive bit flagship version). There are also many posts with the same error under the post of the huzibbs how to recover files on to new hard drive great god, and there is no solution yet.

  Just be diligent, don't be lazy, go into the breed how to recover files using external hard drive reader manually.

  7. In fact, I was very worried at this step, and I worried that the original firmware would be how to recover files when my hard drive fails useless.So before entering breed, restart k2p normally, and found that the original firmware is still how to recover firefox bookmarks from old hard drive there, everything is ok.

  8, k2p power off, press and hold reset and then power on, the led turns how to recover firefox password from old hard drive into a blue light flashing twice, press the button for 40 seconds (in fact, it doesn't take that how to recover folder tib onto new hard drive long) and then let go. The computer network card is set to IP192.168.1.2 255.255.255.0 Gateway 192.168 how to recover formatted data from external hard disk .1.1, browser access 192.168.1.1. The breed web interface appears:

  9.Very good, let's back up the how to recover formatted data from external hard drive programmer firmware and eeprom to prepare for it:

  10. In the next step, you can try to upload the how to recover formatted data from usb hard disk firmware. Here I did not follow the official revision, but used the old version of the wilderness how to recover formatted data from usb using cmd without lights:

  11. After clicking upload, there will be a confirmation, check the md5 value, if it how to recover formatted files from internal hard drive is consistent, it will be no problem:

  12. After the end, k2p automatically restarts, and the computer how to recover formatted files from portable hard drive changes the IP to 192.168.6.2 255.255.255.0 Gateway 192.168.6.1. After k2p restarts, the browser how to recover formatted files from usb for free visits 192.168.6.1 (Old Maozi is 6.1, username and password admin), success:

  13. The advanced how to recover formatted files from usb using cmd features have not been tested yet. Except for the 5G wireless network that seems to be a bit problematic, how to recover formatted files on usb stick free this firmware is quite satisfactory:

  At this point, the flashing is completed, it's not a how to recover formatted hard drive files windows 10 hassle.

  Software that needs to be prepared in advance:

  1.RoutAckProV1B2 (k2p has to manually turn on how to recover formatted hard drive windows 10 free the Telnet function)

  2.Router brush breed+Web console assistant v4.Version 8

  3."Lao Maozi" firmware how to recover formatted hard drive windows 8 1 K2P_3.4.3.9-099

·