Chipsbank CBM2099A mass production failure solution tutorial[Win11 Solutions]

18 2021-08-24 03:40



  A Newman V9, 32G external hard drive, the main control is Chipsbank CBM2099A.Generally speaking, I create usb recovery drive windows 8 1 don't use it very much. There are many external hard drives in my hand, and they are relatively create usb recovery iso disk windows vist a reliable. This is a rubbish, basically not used. A few days ago, I used it to copy more than 20g movies. create usb windows recovery with install iso Copy the office files stored in the computer to the computer, format the external hard drive, and create win 10 recovery usb for surface finally found that those files have been broken, the documents are basically garbled, most of the create windows 10 recovery disk on usb videos are very short, and the screen is blurred again.After that, various Baidus were helpless but create windows 10 recovery drive on usb unable to mass produce it. Later, after using Chipsbank Umptool, it turned into a brick:

  In the past create windows 10 recovery external hard drive with ChipGenius detection results, it is obvious that the flash information is gone after the bricks, create windows 10 recovery image usb drive and the external hard drive can be displayed when plugged into the computer, but the attributes create windows 10 recovery usb from iso are all 0, the format has become raw, and Chipsbank UmpTool can't Recognize flash, not to produce create windows 10 recovery usb from linux energy.I have been looking for a long time but I can't find a solution, but later I still found a solution. create windows 10 recovery usb from mac Since then, a long road to mass production has begun.

  The solution is mainly for the expansion create windows 10 recovery usb from ubuntu disk. Although this external hard drive is not for expansion, it did so. First, use Chipsbank APTool create windows 10 recovery usb on mac mass production tool to erase the mass production information, and then the flash information create windows 10 recovery usb on ubuntu finally appeared, especially M, which is more promising. NS.

  There is flash information in the APTool create windows 10 recovery usb using chromebook mass production tool, but ChipGenius still can't detect it.

  Then it was mass-produced with Chipsbank create windows 10 recovery usb without dvd UmpTool, and the information displayed was the same as that displayed by APTool. It seemed like create windows 7 64 bit recovery usb something was happening, but the result was countless disappointments.

  Every time in mass production, create windows 7 recovery disk on usb the computer does not open other applications, only UmpTool. The whole process takes about 4 create windows 7 recovery disk usb drive hours, and the final result is exactly the same.

  I tried it many times and it was the result. I used create windows 7 recovery usb flash drive the latest tool of UmpTool.

  Later, before mass production, open the UmpTool settings and change the create windows 7 recovery usb for surface fixed capacity in the basic settings to M, the system defaults to 0, and the scan is set to create windows 7 recovery usb from cd mass-produced flash.In other settings, the flash master is selected as 2099, which is not specified by create windows 7 recovery usb from dvd default. In practice, I have tried N times.

  After mass production, the result is still the same as create windows 7 recovery usb from iso before, mass production failed, and configuration table writing failed.

  No way, continue to try, create windows 7 recovery usb from mac anyway, it's mainly during off-duty time, and you don't need to be on duty after turning it on, just see create windows 7 recovery usb from ubuntu the result in the end.In the basic settings, the scan is set to the original flash, and the fixed create windows 7 recovery usb in linux capacity is still M.The fixed capacity of partition 0 in the advanced settings is also changed to M. create windows 7 recovery usb on mac In other settings, the flash master is still switched back and forth between 2099 and unspecified.

  create windows 7 recovery usb without cd  After such a toss, the result is still the same, writing the configuration table failed, and in the create windows 7 recovery usb without dvd basic settings, when the original flash is selected for the scan setting, the mass production process create windows 7 recovery usb without iso is extremely slow, estimated to be close to 6 hours.

  I'm free today, try again.In the basic create windows 8 1 recovery usb dowload settings, the scan is set to erase + original factory, and the fixed capacity is still M.The advanced create windows 8 1 recovery usb online settings remain unchanged, only one partition, the capacity is still M.For other settings, the flash create windows 8 1 usb recovery disk master can simply choose 2098E, although the external hard drive master is 2099A, even try it once.

create windows 8 recovery usb from dvd   The key is here, look at the master used by the flash above, here is 2098E instead of 2099, the key create windows 8 recovery usb from iso is here, I don't know why.

  As a result, a miracle really happened. It was over after a short create windows 8 recovery usb on mac while, and mass production was successful.

  The screenshot of the successful mass production is still create windows 8 recovery usb without cd the designated 2098E. The time is less than 3 minutes. The computer has recognized it, but the size create windows 8.1 recovery usb from iso shows 31.9g, the same size as specified in the settings, 29 when you get it.9g, it is still unknown create windows 8.1 recovery usb on mac whether it can be used normally, try it back and see the situation.

  Hope to help friends who have create windows 8.1 with update recovery usb failed mass production.

  I saw that a friend suggested low-level scanning. Today, I used my free create windows recovery disk usb windows 7 time to mass-produce it again. As a result, it failed again and the external drive became bricked create windows recovery disk windows 7 usb again.

  Then choose to go back to advanced scanning, mass production is successful

  So it can only be create windows recovery drive without usb drive done at the moment, it is considered as a successful repair, I don't know if there is a better way.

create windows recovery usb for another computer

·