Phicomm N1 for how to brush the official modified version of the line brush tutorial[Win11 Solutions]

13 2021-08-23 21:10



  Phicomm N1 is a family cloud disk produced by Phicomm. The key is to activate one for free. Of how to retrieve files off a damaged hard drive course, it is a cash back method. The main function is to use the app to put the mobile video on the TV how to retrieve files off of bad hard drive for playback, so it is rather tasteless, so you need to use this Official modified version of the how to retrieve files on a dead hard drive firmware to realize the TV box function, so that it can play its function.

  Flash Toolkit download

  how to retrieve hidden files from external hard disk  Specific steps for flashing:

  1. Official V2.19 or the updated version of the official website can how to retrieve hidden files from external hard drive be directly powered on for wire brushing

  For specific steps, please refer to the "Phicom N1 line how to retrieve hidden files from usb pen drive brush burning graphic steps" in the brush tool kit.pdf"Tutorial

  2. Official V2.22, V2.23 The adb how to retrieve hidden files in external hard drive script needs to be run on the computer to make N1 enter the line brushing mode and then perform the how to retrieve hidden files in usb using cmd line brushing

  The detailed steps of using adb script to enter the line brush mode:

  1. The box is how to retrieve lost files from external hard drive plugged into the network cable to start normally, check the LAN ip address obtained by the box, the how to retrieve lost files in usb using cmd original factory system N1 needs to connect the mouse to click the "firmware version" several times how to retrieve lost files on a hard drive until the adb is opened;

  2. Connect the box and the computer with a USB double male cable;

  3. Run how to retrieve lost files on external hard drive the wire brush tool on the computer to load the wire brush package. If you are not saving the brick how to retrieve mac files from pc hard drive package, please pay attention to removing the two erasing options, and click the "start" button;

  how to retrieve metadata for files on a usb  Then run the adb batch script on the computer, enter the box ip address and press Enter;

  4. The how to retrieve microsoft cloud files to hard drive script command will restart the box and enter the line flashing mode. Note that if the computer is not how to retrieve missing files from external hard drive connected to the computer with the USB double male cable in advance, the box will enter the line how to retrieve missing files on external hard drive flashing mode and fail to enter the recovery system;

  5. When the box enters the wire brush mode, the how to retrieve outlook files from a hard drive computer will find the new device libusb32 / Worldcup Device, and the wire brush tool will automatically how to retrieve shortcut files in usb using cmd start burning.

  3. Phicomm N1 restores the original samba function

  Because of the defect how to retrieve unhide files in usb using cmd of Phicomm's original firmware, the samba configuration file will not be restored automatically, so how to revert a usb from a recovery drive the samba function will become invalid after the line is brushed or the factory settings are restored.!

  1. how to run data recovery on a hard drive First follow steps 1 or 2 to change the N1 line to v1.1

  2. Unzip "Restore samba function how to run dell usb recovery tool in xp samba-restore.zip", get "samba.tar.gz ""restoresmb.sh": Then copy these two files to the root directory how to run recovery from usb insydeh20 setup utility of the external hard drive that can be recognized by N1!Finally, insert the external hard drive how to run windows 7 recovery disc from usb into the USB port of N1!

  3. The computer is connected to the telnet service of N1. Terminal software how to run windows 8 1 recovery from usb such as SecureCRT can be used on port 2323, or the windows cmd terminal can be used directly (the how to run windows xp recovery console from usb shortcut window of Win+R pops up and runs, and then enters telnet followed by the IP address of N1 how to set up a usb for password recovery during operation) telnet command my N1 ip address is 192.168.99.170, enter according to the following how to slave a hard drive to recover dat a code and press Enter

  telnet 192.168.99.170 2323

  4. Enter the df command to view the external how to start windows 10 with recovery usb drive hard drive path, and enter the external hard drive path, the following is my external hard drive path, how to transfer recovery partition to another hard drive please replace it with yours

  cd /mnt/media_rw/0631-4E94

  5. Run the script to restore the samba how to transfer recovery partition to new hard drive configuration file, the box restarts after the restoration is complete

  6. After the box restarts how to unlock mac hard drive in recovery mode and enters the desktop, the computer accesses the samba path of the box, and directly enters the path how to use a recovery drive usb windows 10 // box IP in the windows file manager. The default user name and password are root / admin, which how to use a recovery usb drive windows 10 can be modified with the Tiantianchain app!

  Fourth, open permanent root

  In step three, after going how to use a recovery usb for windows 10 to the telnet terminal connected to N1!After entering and running the following three lines of how to use a recovery usb on windows 10 commands, N1 restarts to open the permanent silent authorization root!

  mount -o rw,remount /system

   how to use a usb recovery drive windows 10 chmod /system/xbin/su

  Five, pay attention

  1.Click the version number 3~4 times to open "remote how to use a usb recovery drive windows 7 debugging adb".

  2.USB male to male plug into the port on the side of HDMI.

  3.After importing the how to use a usb recovery drive windows 8 flashing package, immediately uncheck the two options for erasing.

  4.Your N1 has been automatically how to use a usb recovery drive windows 8.1 upgraded to 2.23. A script is required to enter the flashing mode.

  5.If adb can't connect, you how to use a usb recovery flash drive toshib a can turn off the firewall and protection software and try again!

  6.The machine friends who have how to use a windows 10 usb recovery drive brushed the official reform have feedback, and it does not affect mining

  After the official update, how to use a windows 8 1 recovery usb there are more functions, but the previous functions are not affected. If you have this device in your how to use a windows 8 usb recovery drive hand, you may wish to use it to work for you as much as possible. Of course, there is a risk in how to use dell usb recovery media windows 10 flashing, so pay attention to learn more.

·