SandForce SF2281 VB1 solid state external hard drive dropped disk repair method[Win11 Solutions]

31 2021-08-23 19:30



  A solid state hard drive will be dropped as long as data is written. When it is disassembled, it copy recovery partition to usb greyed out is the SandForce SF2281 main control. The flash memory is the H27QEG8YEBJR of Hynix 26NM and it is copy recovery partition to usb windows 10 also a BGA100 particle. After checking that this particle has Gold firmware, I downloaded the SF series copy recovery partition to usb windows 7 card opening virtual machine. Come to open card repair.

  After reading the SMART information, it copy recovery partition to usb windows 8 was broken before the 10T write was reached. It was broken relatively quickly. Let's start the repair copy recovery partition to usb windows 8.1 tutorial below.

  1. Find 5.8Firmware support table, this time select 5.8 The firmware is flashed copy windows 10 recovery partition to usb to find the main control and the code corresponding to the particle, because it is composed of 4 H27 copy windows 7 recovery disc to usb QEG8YEBJR.

  So GOLD firmware or other compatible firmware can be selected, so the codes of , , are copy windows 7 recovery disk to usb selected here

  2. Then connect to the virtual machine, add the code on the support table to the lic copy windows recovery partition to usbwindows 7 file, and removeXXX

  This label and its content

  3. Then use the checksum corrupt file in hardrive stucks the recovery tool to regenerate the check code

  4. Then open the PackageManager tool to generate the corresponding corrupt file in hardrive stucks tje recovery MFP file

  5. After generating the MFP, configure driveconfig and save it as a copy

  6. Then get corrupt hard drive data recovery software free the corresponding label for the hard disk connected to the virtual machine, and enter lsscsi in the corrupt hard drive recovery software free download terminal

  Here you can see that the label of the connected hard disk is 53:0:0:0. Keep this label in corrupted external hard drive data recovery review mind

  7. Then enter the card opening command in the terminal (as shown below)

  Here is a brief corrupted external hard drive data recovery software description of the card opening command

  -PROCESS_SSD [Space] Your hard disk label [Space] The directory corrupted external hard drive mac data recovery where you store the MFP files [Space] The path to the driveconfig you saved [Space] Log directory

  8. corrupted external hard drive recovery software free Everything is ready, press Enter to run, wait for 3-5 minutes, if the command and firmware cost for dead hard drive data recovery configuration are all ok, it will PASS

  9. Finally successfully repaired, check the speed and ssd cost of data recovery external hard drive information

  Summary: The above repair process is a relatively simple process, but probably the steps cost of file recovery from hard drive are okay. You can refer to other SF2281 on external hard drive Network for reference.

·