Huirong SM3259AA master control external hard drive no firmware repair mass production steps[Win11 Solutions]
13 2021-08-21 07:40
A external drive is broken and I want to repair it in mass production. I use ChipGenius to detect windows 7 enterprise recovery usb download free that the main control is SM3259AA. I have found many mass production tools for SM3259AA and failed windows 7 free password recovery tool usb to mass production. If it is not for the capacity after mass production, the capacity is 0. Just the windows 7 home premium password recovery usb capacity is not enough, finally find the right mass production tool and use the right method to windows 7 home premium recovery disk usb succeed.
The mass production tools are:
SM3259AA mass production tool V15.10.05.21 O1012
The mass windows 7 home premium recovery usb download production method is:
1. If your external drive is plugged in without setting up, just click Scan, windows 7 home premium sp1 recovery usb and then click to start mass production. The mass production may also be successful. If you are windows 7 move recovery partition to usb lucky, the external drive will be repaired. If you are lucky, the following picture may appear. Such a windows 7 password recovery linux boot usb capacity of 8G has become 2.7G.
2. At this time, we need to mass-produce again, and set it, the windows 7 password recovery tool bootable usb setting password is blank, and the setting is checked as shown in the figure below
3. Select 48 for windows 7 password recovery tool free usb the low grid, this value is changed from "SM3259AA."FFW" to view the file, open it with Notepad, and windows 7 password recovery tool usb boot find the corresponding flash memory identification code, mine is ECDE88BF90C6 (this flash memory windows 7 password recovery tool usb download code can be seen here), as shown below
4. This is the main point. By default, flashid will choose windows 7 password recovery tool usb iso your external hard drive model, based on the detection by the mass production tool.
Then select the windows 7 password recovery tool usb mydigital flash model in the settings
5. Click the "Settings" under "Bin BIN Capacity Setting" to set it.
windows 7 password recovery usb boot free 6. Check both the color corresponding to the value of your external hard drive capacity and the color windows 7 password recovery usb flash drive that is smaller than the value of your external hard drive capacity, so check BIN2, BIN3, BIN4, windows 7 password recovery usb for mac BIN5, BIN6, if your external hard drive capacity is greater than 16g, both Hit
7. Then after the windows 7 password recovery usb tool free setting is completed, as shown in the figure below
Click to save the settings, start mass production windows 7 professional 64 bit recovery usb again, wait for success and repair your external hard drive.