FirstChip onecore FC1178BC mass production usbcdrom boot disk tutorial[Win11 Solutions]

41 2021-08-21 01:30



  A copycat external hard drive, if you want to mass produce a USB-cdrom boot disk, although the how to retrieve deleted files from usb using command prompt quality of the copycat external hard drive is not very good, the main consideration is the ability to how to retrieve deleted files on a mac usb stick read data when making a system external hard drive. It is said that copycat disks are still enough, how to retrieve deleted files on external hard drive mac so let's teach you how to mass produce.

  The first choice is of course to determine the main control how to retrieve deleted files on hard drive for free of the external drive. This is the first step and the most critical step. Only after confirming can how to retrieve deleted files on hard drive using run you find the corresponding mass production tool. The software is of course ChipGenius. You can see how to retrieve file from hard drive that is corrupted the main control of the external drive from the figure below. The controller is a one-core FC1178BC, how to retrieve files and folders from internal hard drive which is considered a relatively new master controller. Fortunately, it has corresponding mass how to retrieve files from a broken laptop hard drive production tools that can be used.

  The first mass production tool found is iTe_MpTools_, which shows how to retrieve files from a corrupted external hard drive that the port is missing. After changing the port lock to sequential insertion, there will be no how to retrieve files from a corrupted usb without formatting prompt.

  Then start, the software is in Chinese, so the difficulty is greatly reduced, click Mass how to retrieve files from a crashed external hard drive Production Settings → Scan Level → 3- Advanced Format, then save the settings, click to start mass how to retrieve files from a crashed internal hard drive production.

  It prompts to fail soon, and it shows that please use the new version, as shown in the how to retrieve files from a damaged external hard drive figure:

  It turns out that the version is too low. Re-download the universal version iTe_MpTools_. This how to retrieve files from a dead external hard drive is a relatively new version. If you are still prompted for a new version in the future, please go to how to retrieve files from a dead laptop hard drive the main control section of this site to find a new one.

  The mass production settings are as how to retrieve files from a dead usb flash drive follows:

  In the mass production setting, scan level selection 2-low-level format.

  Product settings, how to retrieve files from a toshiba external hard drive as shown in the figure above, the serial number is automatic, and others can be filled in by how to retrieve files from external drive on hp chromebook themselves.

  Disk setting items, as shown in the figure above, because cdrom boot disk is to be mass-produced, how to retrieve files from external hard drive using cmd so the disk type should be cd-rom, copy files, and you are ready to be a winpe iso mirror.

  Bin how to retrieve files from formatted hard drive for free setting, as shown in the figure above, fill in according to your external hard drive capacity, here how to retrieve files from usb flash drive using cmd is 16G, so fill in M

  For the last option, just click the tick on the picture, and then click OK. how to retrieve hidden files from usb because of virus If you choose 2-low-level format for mass production of one-core external hard drive, the time will how to retrieve hidden files in usb using command prompt be longer, so you must have time to prepare. If the external hard drive has few bad blocks, it is how to retrieve hidden files on my external hard drive recommended to choose 3-high-level format, so the mass production time is very short.

  After saving how to retrieve lost files from corrupted external hard drive the settings, click Start All to start mass production.

  After more than one hour and twenty minutes, how to run first aid from recovery external hard drive the mass production was successful and the capacity setting failed. Check the user manual of the how to run recovery from usb insydeh20 setup utility gateway mass production tool → error code description

  →Fixed capacity failed →When the FLASH scan capacity how to set up a win 10 recovery usb drive is less than the set fixed capacity, it means that the set capacity is too large.

  It can be seen how to set up external hard drive as recovery drive from the figure that the actual scanned capacity is MB, so readjust the capacity setting in the bin how to setup a usb for password recovery windows 10 setting, as shown in the figure below:

  Set the scan level again → 3- Advanced format, the others how to setup a usb transfer on t wrp recovery remain unchanged.

  This time it was very fast, after two minutes and forty seconds it showed success. how to setup recovery partition for mac new hard drive

  Mass production information:

  Then copy the image, software, etc. to the second partition, and how to slave a laptop hard drive to recover dat a the final effect is as follows:

  At this point, the one-core master FC1178BC mass-produced USB cdrom how to slave a sata hard drive to recover dat a boot disk is successful. At this time, the external drive becomes 2 partitions, one is a cdrom disk, how to stop external drive from being a recovery drive the other is a normal external drive partition, and it is also a more commonly used system external how to switch from recovery mode to hard drive mac drive. The production method is more troublesome compared to the USB boot disk creation tool, but how to turn a recovery drive back to a usbv it also has the advantage that cdrom can't be deleted, it is always there, and the startup success how to turn recovery flash drive back to normal usb rate is higher than that of usb-hdd. If you only use the external drive For repairing, don't choose how to use a usb as a windows recovery disk cdrom for the above disk setting disk type, just choose removable disk.

·