Win11 shuts down and restarts[Win11 Solutions]

12 2021-08-19 22:50

  Recently, a friend encountered a computer that shuts down and restarts automatically. After turning recover data from my dead hard drive it off several times, there is no way to turn off the computer. Is there any way to solve this recover data from my external hard drive situation.

  This type of failure is generally caused by the user inadvertently or using some software recover data from my passport hard drive to set the system, using the quick shutdown function of the Windows system, which causes the failure.If recover data from non bootable hard drive it is solved by defragmenting the hard disk or reinstalling Windows, this is more troublesome.The recover data from non booting hard drive editor summarizes the following two solutions:

  Solution one is as follows:

  1: Click recover data from non spinning hard drive "Start"-"Run"-"msconfig"

  2: Then select Advanced in the "System Configuration Utility" panel

  3: Select recover data from ntfs external hard drive "Disable Fast Shutdown" among them

  4: Restart the computer to solve it.

  The second solution is as recover data from old external hard drive follows:

  Step 1: Turn off the automatic restart setting of the computer when an error occurs in the recover data from old ide hard drive system, right-click "My Computer" -> select "Properties" -> select the "Advanced" tab in the pop-up recover data from old laptop hard drive "System Properties" dialog box- —> Click "Settings" in the lower right corner of the "Startup and recover data from old mac hard drive Failure Recovery" item below -> In the pop-up "Startup and Failure Recovery" dialog box, remove the recover data from old pc hard drive tick in front of "Automatic restart" -> Click "OK "quit;

  Step 2: Click the "Start" menu -> select " recover data from old ps3 hard drive Run" -> enter "regedit" to open the registry -> expand the [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindow recover data from old ps4 hard drive NTCurrentversionWinlgon] project in order, and find the "PowerdownAfterShutdown" subkey on the right recover data from one hard drive raid0 side of the Winlgon project- —> Right-click and select "Modify" —> Change the value data to "1" — recover data from one hard drive raid1 > If the "PowerdownAfterShutdown" sub-item is not found, you can right-click to create a new recover data from partitioned hard drive mac "PowerdownAfterShutdown" item, and set its data value to "1".

  Step 3: Open "Network Neighborhood" -> recover data from password protected external drive Right-click "Local Area Connection" and select "Properties" -> Click "Configuration (C)" in the upper recover data from pgp encrypted hard drive part of the "General" tab -> Select "Power Management" -> Tick "Allow the computer to turn off this recover data from phone with broken usb device to save power" and remove the check mark in front of "Allow this device to take the computer out recover data from physically damaged hard drive of standby" —> click "OK" to exit.

  If you try the above methods and still can't solve the problems recover data from portable harddrive not working of automatic restart after shutdown, and automatic restart of the computer after shutdown, it is recover data from ps4 damaged hard drive recommended to focus on checking whether the CPU, graphics card, motherboard, and memory inside the recover data from quick formatted hard drive chassis are overheated, which will occupy some resources when shutting down and cause hardware When recover data from raid 1 hard drive the temperature rises above a certain temperature protection limit, the computer will automatically recover data from raid 5 hard drive restart, that is, the computer will automatically restart before it is completely shut down; or you recover data from raw external hard drive can perform a comprehensive scan of the system to exclude the automatic restart after shutdown due recover data from raw hard drive freeware to virus infection , The computer shuts down and automatically restarts the problem.