Phicomm K2P original version 2278x Flash thirdparty package tutorial[Win11 Solutions]

27 2021-08-19 10:30



  Phicomm K2P original firmware has been upgraded to 22.7.8.x, the previous flashing method may no how to recover formatted hard drive without any software longer be applicable, so here is a new flashing method to teach you.

  When the K2P MTK version was how to recover formatted usb flash drive without software released, it used 22.5.7.85. Both the official version of this version and the Gao Ke K2P firmware can how to recover from a bad hard drive mac be directly upgraded from the Phicomm firmware, which is the so-called direct brush.But the good how to recover from external only part files show times did not last long, and later versions such as 22.5.17.33, the encryption method is changed, and how to recover hard drive data bit by bit it is not convenient to directly flash. At this time, you can enter the bootloader (which is similar how to recover hard drive data from broken laptop to breed) to flash the official changes, and then indirectly flash the breed.But wait until PHICOMM's how to recover hard drive data from dead computer factory firmware 22.7.8.2At first, this method didn't work anymore.At this point, you can use the how to recover hard drive data from dead ipad telnet cracking tool, and then indirectly brush into the breed after opening telnet. The following how to recover hard drive data from dead laptop is the specific operation tutorial of this method

  Please power on K2P and connect PC and K2P how to recover hard drive data from macbook air according to the schematic diagram. The wiring diagram is as follows:

  The new K2P default IP is 192.16 how to recover hard drive data from macbook pro 8.2.1. Please use a browser to log in to the K2P WEB management page to complete the configuration how to recover hard drive files from dead computer guide. The specific operations are as follows:

  1) If the PC uses DHCP to access the Internet, please how to recover hard drive for free for mac go directly to the next step.If the PC uses a static IP to access the Internet, please configure how to recover hard drive from a broken laptop IP: 192.168.2.100, mask: 255.255.255.0, gateway: 192.168.2.1.

  2) Enter 192 in the browser.168.2.1. how to recover hard drive sony model pcg 71912l Visit the WEB management page of the new K2P to enter the configuration guide, please follow the how to recover hard drive space on a mac prompts to complete the Internet configuration.

  Please reconfirm the version number of K2P at this how to recover hard drive storage by removing raid time. If the version number does not match the flashing method, problems such as flashing equipment are how to recover hard drive that won t boot prone to occur.

  To start downloading, use "open telnet" to flash, please open [telnet open tool] how to recover hidden data from usb flash drive to open telnet service for K2P, the operation is as follows.

  Note: Please make sure that the telnet how to recover hidden data from usb using cmd of the PC has been turned on, Baidu search Windows to enable telnet, you can view the relevant how to recover hidden files from external hard disk instructions.

  After completing [2-2)], the router is already connected to the Internet, please use how to recover hidden files from external hard drive your PC to visit Baidu to confirm. If you can't connect to the Internet, please find a way to search how to recover hidden files from usb hard disk for K2P online guide on Baidu.After the router is connected to the Internet, use windows telnet to how to recover hidden files from usb pen drive log in to k2p and execute:

  wget -O /tmp/k2p.sh

  chmod 755 /tmp/k2p.sh

  After execution, the router how to recover hidden files from usb using cmd will download the firmware and automatically flash it. After two minutes, it will automatically how to recover hidden files from virus infected usb reset and restart. The script comes with md5 verification. Don't worry about flashing errors. The command how to recover hidden files in external hard drive execution result should be as shown in the figure below:

  After completing step 4, breed will how to recover hidden files in usb using cmd be flashed into K2P, and the default IP of breed is 192.168.1.1. Please use the browser to log in to how to recover hidden files on a hard drive the web management page of the breed to flash the third-party firmware package, the operation is as how to recover hidden files on usb flash drive follows.

  1) If the PC uses DHCP to access the Internet, please go directly to the next step.If the how to recover hidden folder in external hard disk PC uses a static IP to access the Internet, please configure IP: 192.168.1.100, mask: 255.255.255.0 how to recover hiding file from my external drive , gateway: 192.168.1.1.

  2) Please power off K2P, press and hold the K2P reset button and then power how to recover individual hard drive mac recovery mode on, press and hold for 10 seconds and then release.

  3) Clear the browser cache first, and then how to recover info from a broken hard drive enter 192 in the browser.168.1.1Visit the breed flashing page.Use [third-party firmware package] and how to recover info from a crashed hard drive [flash layout] in [Firmware Options] on the flashing page to flash the machine,.

  You can flash other how to recover info off of a hard drive firmware everywhere. It is a relatively new flashing tutorial for K2P at present.

·